Go for repair or continue to use it regardless of failure will break the charge port eventually. We encountered this problem; this article is about troubleshooting for hp laptop charging port repair.
Confirm whether charging port is faulty
Contact the official after-sales service if it is faulty. Some notebooks tell you that this is normal. Charging plugs generally have a certain range of looseness. But conventionally, this comes from the motherboard flexing, as the cable is connected to the corner of the MB. It shouldn't be a problem, but if you continue to wiggle it over time it could bend the MB and sever a connection. Typically, this isn't a defect,mostly it comes on low end devices with poor internal Mobo support.
Clear the charging port
Tools:
Tweezers
Pin
Using the notebook, the charging port is often not tight, resulting in failure to charge or poor charging contact.The charging plug swings in the charging port.
This situation usually occurs when the laptop charging interface of your laptop is broken. In fact, the reason for this is the long-term accumulation of dust and fluff in your pocket.
The solution is to use sharp tools such as tweezers or paper clips to gently pick out the compacted dust when the computer is turned off.
Finally, after the charging interface is cleaned up, the laptop can be charged normally.
Check the laptop adapter
The first step in solving such problems is to identify the core issues. You may experience a faulty charger port.
If your laptop charger not working,you must replace or repair the charger to continue use your laptop.
First determine if the jack on the laptop is loose or the adapter plug. If there are obvious signs of damage at the interface of the adapter, then the adapter must be replaced and tested.Replacing a broken adapter is simple, just buy a replacement laptop adapter according to the notebook model specifications. If you have more questions about how to buy a laptop adapter, please click here.
Laptop Connector DC Board:
If the laptop power outlet is loose,the laptop's charging port must be repaired. There may be a problem with the laptop power socket. Check if the metal tentacles are deformed or broken. If the charging port of the motherboard is open, then it can be used normally after disassembling and then welding.
The external power plug of the notebook is loose, and the power socket of the notebook is generally designed in a modular manner. It is simple to replace these parts. You only need to purchase accessories of the same model of notebook, and then you can replace the laptop broken part. The notebook needs to first remove the hard disk and then the keyboard bezel, then remove the keyboard, then the screen,then remove the rear cover, remove the shield, and finally remove the motherboard.
HP laptop charging port is loose
If the power jack is loose,solder some connections and reconnect it to the motherboard.
Disassemble the laptop.
Next, remove the motherboard and power jack to the repair shop.
You can also replace the internal charging board.
GEMWON provides Laptop Dc Jack/Cord for most brand of notebooks, and if you need it, you can find it here. 16 years of laptop parts wholesale, let us have the most models of notebook parts and supply chain. Come GEMWON and tell us your needs. All orders will be shipped all over the world as fast as possible.
Damaged motherboard
After repairing or replacing the power jack, if the laptop cannot be charged or cannot be powered by AC power,the motherboard may also be damaged. A professional motherboard inspection repair shop is recommended.
Symptoms include: After the adapter is plugged, the laptop can't be charged.
The Bottom Line:
The physical defect will cause the laptop charger to be damaged or stop working. According to the laptop charging port repair cost and tips, the intermittent charging failure of the laptop caused by the loose adapter is solved. I hope to help you, if you think it is useful, I hope you share it with more friends.
Related Articles:
How to Buy a Laptop Charger Online
How to Fix a Laptop Not Charging