The laptop is a very sophisticated electronic device. Many problems, such as repairing the motherboard damaged by water, require professional personnel to repair usually.But replacing the laptop screen is simple, and most laptop models use a similar screen-mounting method. You can replace screen of your laptop with the instructions below. It works for most notebook models.
Part 1:
Operating for PreparationBefore starting the fix LCD screen, you need some maintain tools and a replaced laptop screen.
The tool:
A suit Philips screwdriver and a very thin blade or plastic blade;
The new LCD screen match the old model,including the screen size, Interface specifications.
you can buy a new laptop screen repair nearly from a local shop, or choose a more affordable online store, such as Amazon,eBay, laptop Gemwon.
Part 2:
How to Fix Laptop Damaged Screen1.Remove the Fixing Screws from Damaged Laptop Screen
In order to remove the LCD screen frame from the front of the laptop, you need to find the screws that secure the screen to the cover. These screws are usually located in each of the four corners and are covered with a plastic or rubber cover. These hats can be removed slowly using your blade or other sharp objects. Once the cover is removed, unscrew the screws underneath and place them in a centralized place for reuse in install the new laptop screen.
2. Take Off the Laptop Screen Frame
After some models of laptop fixed screws are unscrewed, the screen will be released or popped out of the plastic, this is very easy. More notebooks will be glued or taped, and you will need to insert a blade or plastic blade into the gap between the crack LCD screen and cover and then pry it open to remove it.
3. Remove All Screen Cables and the Damaged Laptop Screen
The LCD cable can be removed from the back of the LCD screen, which usually has a strap attached to the back of the screen. Pull the tape down gently, loosen and remove the cable. Sometimes there will be clips to hold the cable in place. If so, loosen and remove the cable and the repair LCD screen.
4. Separate LCD Screen Inverter
Most screens have an inverter cable located below the laptop screen. It is usually a strip or board. There is usually a break or white coming out of the screen and having a white plug that is pushed into one side of the inverter. Pull it out gently and it's easy to remove it.
Note: Older laptop models sometimes add an extra power cord to the bottom of the LCD screen. This cable is easy to unplug,just like the inverter cable, and when reinserted, it can only be reconnected to the new screen in the right way.
5. Install the Replaced Laptop Screen
The restore work of this step will be very easy. The operation of this step is to reverse the 4 steps in front, but it is necessary to install a new laptop screen.
Through the above steps, you should realize that replacing the laptop screen at home is not a complicated matter, but it does require a little patience and care, because it will ensure that you complete the fix broken LCD laptop screen without damaging other laptop parts.
Related Articles:
How to Fix Laptop Screen Flickering
How to Fix Laptop Screen Black