It is not easy to disassemble the iPhone 8. This is a job that requires patience. If you want to know the iPhone hardware or to iPhone 8 screen disassembly, i hope you are ready to do following steps.
Tools for iPhone 8/8 Plus Disassembly:
- needle for removal card
- Thin blade
- Pentagonal screwdriver
- Suction Cup Repair Opening Tool
- tweezers
- plastic pry tool
Full Disassembly Step for iPhone 8:
1.Turn off the iPhone 8 and then use the needle for removal card to take off the SIM card and holder.
2. Use the suitable pentagonal screwdriver to remove the two fixing screws on both sides of the data connector at the bottom of the iPhone.
3. iPhone 8 Screen Disassembly
The screen panel of this phone is fixed by snap + glue and has a certain waterproof effect. Before disassembling, you need to heat the screen around, so that the glue softens first, then you can use the suction cup to separate the screen of iPhone 8.
4. After sucking the gap with the suction cup, the screen can be slowly separated by means of a plastic pry tool that is cut along the circumference of the slit. It should be noted that there is a cable connection between the screen and the iPhone 8 motherboard, so do not pull it hard to avoid damage to the cable.
5. Next, use a screwdriver to remove the screws of iPhone screen and fingerprint sensor cable on the motherboard, then you can disconnect the screen cable, the connection between the fingerprint sensor and the motherboard, disconnect the battery connector. Finally, separate the screen from the motherboard successfully.
6. To disassemble the iPhone 8 battery, first disconnect the battery from the motherboard. Then pull out the bottom four battery adhesive and take off the battery. The built-in battery capacity of the Phone 8 is reduced compared to the iPhone 7,and the built-in battery is 1821 MA.
7.After removing the iPhone 8 battery, were moved the rear camera on the motherboard. The iPhone 8 is the same as the iPhone 7, with an f/1.8, 12-megapixel, and the sensor is larger than the 7th generation. Therefore, the light and color sense are more obvious.
8.Continue to disassemble the taptic engine fixed at the bottom of the motherboard. It is the iPhone 8 screen pressure and vibration feedback module, which adds a fixed plate to the iPhone.
9.Dismantling the iPhone 8 motherboard.You need to remove the hidden screws under the waterproof silicone seal to remove the iPhone 8 motherboard.
10.Then remove the speaker module at the bottom, which contains two small modules, theair pressure hole and the speaker. The air pressure hole measures the altitude at which you are located.
11.Separate the iPhone 8 glass back shell from the metal middle frame. First use a thin blade to find the gap from data interface, and then use the thin blade to cut the back-cover gap and separate the glass back shell.
12.The final step is to disassemble the iPhone 8 screen panel. The detachable components are the front camera and the fingerprint sensor. After the following steps of iPhone 8 LCD disassembly, you can change the broken LCD panel and touch screen.
13. Let's examine all accessories that the iPhone 8 has disassembled.
iPhone 8 Teardown Summary:
Overall, it’s a bit difficult to disassemble the iPhone 8. It designs a lot of glue to bond inside, and it is difficult to disassemble iPhone 8 without the repair tools. I believe you can use this article to replace iphone 8 screen, battery, iphone 8 speaker replacement and so on. If you need to replace any repair parts please refer to: phone.gemwon.com
Related Articles:
How to Repair Cracked iPhone Screen
How to Fix iPhone 7 Touch Screen Not Working
How to Replace iPhone 7 Screen
附件: iphone-8-accessories.jpg